I am currently trying to dump the content of a NAND Flash that is part of an embedded system. I am pretty new to this but I already did some reasearch work and I think I am not that far away anymore but the "last" step is giving me some headaches.

I am a little bit limited because I can't desolder the NAND Flash so I try to get access to its content while it's still assembled.

My idea was getting the Bus Pirate v4, connecting it to the NAND Flash and reading out the content via flashrom. I knew that flashrom has some problems with the Bus Pirate when it is used in a Virtual Machine from the DangerousPrototypes Forum but I tried it anyways and as expected it doesn't really work. So I tried to get a Windows version of flashrom. Unfortunately it's a pretty old one but I wanted to see what happens when I try to read out the Flash and I got the following output:

Found Chip "Generic unknown SPI chip (RDID)" (0 KB, SPI) at physical address 0x0. This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE

I am a little bit confused right now, is there any other tool that I can use to read out the Flash or what can I do to access the content?

Btw since the Flash is still soldered to the embedded system is it important to hold the system in reset? I read something about that but I didn't want to do that before understanding why this could be an issue.

I am currently trying to dump the content of a NAND Flash that is part of an embedded system.

The chip is a QCA4531 and the NAND Flash is a GD5F1GQ4RCYIG. The module consists of 28 Pins, 14 per side. The NAND Flash has 8 contacts, 4 per side.

I am pretty new to this but I already did some reasearch work and I think I am not that far away anymore but the "last" step is giving me some headaches.

I am a little bit limited because I can't desolder the NAND Flash so I try to get access to its content while it's still assembled.

My idea was getting the Bus Pirate v4, connecting it to the NAND Flash and reading out the content via flashrom. I knew that flashrom has some problems with the Bus Pirate when it is used in a Virtual Machine from the DangerousPrototypes Forum but I tried it anyways and as expected it doesn't really work. So I tried to get a Windows version of flashrom. Unfortunately it's a pretty old one but I wanted to see what happens when I try to read out the Flash and I got the following output:

Found Chip "Generic unknown SPI chip (RDID)" (0 KB, SPI) at physical address 0x0. This flash part has status NOT WORKING for operations: PROBE READ ERASE WRITE

I am a little bit confused right now, is there any other tool that I can use to read out the Flash or what can I do to access the content?

Btw since the Flash is still soldered to the embedded system is it important to hold the system in reset? I read something about that but I didn't want to do that before understanding why this could be an issue.