2

I tried to program SPI Flash NVRAM (S25FL064A) from U-boot, but it not allow to write:

tftp 0x80000100 nvram.bin
cp.b 0x80000100 0x007b0000 0x00050000

There is no error shown after cp.b command, just not allow to write. What can be the problem? Flash memory structure, from U-Boot 1.2.0 printenv:

Serial Flash [Bus:0 CS:0] : s25fl064a 8192KB, 128 sectors each  64KB
7 cmdlinepart partitions found on MTD device spansion
partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) }
partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) }
partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) }
partitions[3] = {.name = firmware_EH, .offset = 0x004a0000,.size = 0x002d0000 (2880K) }
partitions[4] = {.name = nvram, .offset = 0x007b0000,.size = 0x00050000 (320K) }
partitions[5] = {.name = UBFI1, .offset = 0x00040000,.size = 0x003b0000 (3776K) }
partitions[6] = {.name = UBFI2, .offset = 0x003f0000,.size = 0x003b0000 (3776K) }
Creating 7 MTD partitions on "spansion":
0x00000000-0x00020000 : "U-Boot"
0x00020000-0x00030000 : "env1"
0x00030000-0x00040000 : "env2"
0x004a0000-0x00770000 : "firmware_EH"
0x007b0000-0x00800000 : "nvram"
0x00040000-0x003f0000 : "UBFI1"
0x003f0000-0x007a0000 : "UBFI2"

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Browse other questions tagged or ask your own question.