I am completely noob in reverse engineering, and I've just started to learn it.
Now I have this question in my mind, that does a reverse engineer use any computer architecture knowledge for doing his/her work? I mean in any field (software/hardware RE).

  • 5
    How could you not? Are you suggesting knowledge of computer architecture might not be needed for reverse engineering computer architecture, or what? Commented Jul 20, 2022 at 23:16
  • Perhaps reverse engineering should be better RCE/SRE, i.e. limited to code/software, in the scope of this question? At least that's how the question came across to me. I.e. not being about reverse engineering a computer architecture and asking whether generic knowledge of the latter is required to perform such a feat. On the other hand a lot of computer architecture is relevant all the time when I do reverse engineering. For example lately I looked at a dump of JITed code and the fact that it ran on a CISC ISA played into how I could explore the surroundings of the crash site.
    – 0xC0000022L
    Commented Jul 21, 2022 at 12:27
  • Are you reverse engineering hardware or software? If it's software, then there is no need to understand how an address/data bus works. If it's hardware, there's no need to understand how a JVM or CLR works.
    – Neil
    Commented Jul 21, 2022 at 12:42

4 Answers 4


The question is too broad, but I'll try to answer and hope that it will help.

It depends on what exactly do you mean by computer architecture and area you applying your reverse engineering skills to. Reverse engineering Java code, Android apks, native binaries of any OS, and (for example) router or ECU firmwares are completely different things, and in some areas you will not need the data learned during the computer architecture course directly.

However the concepts learned during computer architecture course are very important for understanding how the device works, and understanding (for example) how memory access and instruction pipelines work may be critical for understanding some specific piece of code.

So in my specific case the answer is yes, I used this knowledge for reverse engineering.

  • Usually I don't think the pipeline details are important. What is very important are the basics: what does a CPU actually do? what does code actually mean? how does CPU+code = stuff happening? Commented Jul 20, 2022 at 23:53
  • @user253751 Depends whether the computer uses delay slots: specifically, the speculative execution v.s. delay slots v.s. VLIW distinction can be really important.
    – wizzwizz4
    Commented Jul 21, 2022 at 0:51
  • @wizzwizz4 I think only MIPS uses delay slots; they don't actually match the pipeline of newer MIPS processors; any introduction to MIPS would tell you about them Commented Jul 21, 2022 at 4:12

A solid understanding of the fundamentals of computer architecture is very useful for a Reverse Engineer.

That said - it depends on your target. If you are reverse engineering a Java application or a web application, then clearly you won't be dealing with assembly languages and other low level concepts (though it's possible you encounter bytecode or Web Assembly). Reverse Engineering is more of a mindset than specific knowledge of computer internals.

For example, let's say you run an application and you are prompted to enter a username and password. Perhaps you want to find where in the application that logic is handled. You might do something like search for strings that are included in the login prompt and follow their references until you encounter the code that presents the prompt and handles the user input. That may lead you to find how the credentials are validated, are there any cryptographic methods used on the input, does the application make a web request to validate the credentials, etc.

The most important thing for reverse engineering isn't necessarily understanding how computer architecture works, but rather how computers and computer applications work in general. Back to the login example, clearly the user credentials have to be validated somehow, either resident on the machine or over a network. You use this knowledge to "dig deeper" and acquire an understanding of the internals of some program/machine that would otherwise be a blackbox.

Now, if you are reverse engineering compiled PE or ELF binaries, then you'll likely need to understand assembly language at some level. I often need to identify cryptographic routines within compiled binaries and without understanding assembly, the stack, the heap, system calls, control flow, and etc, I would not be able to understand the code I am analyzing and I would not have much success with whatever tools I'm using (or developing) to aid my analysis.

Good luck on your endeavor into reverse engineering!

  • I disagree about the part that specific knowledge isn't required. It is most certainly required and in vast quantities, because how else could you ever "connect the dots" which to me is a prerequisite to any SRE endeavor? But I agree too much with the other stuff said to downvote ...
    – 0xC0000022L
    Commented Jul 21, 2022 at 12:21
  • 1
    I didn't intend to suggest that you don't need specific technical knowledge to be a reverse engineer. Rather, you don't necessarily need specific knowledge regarding computer architecture if your target isn't a compiled binary, for example. Clearly advanced knowledge of computer architecture and assembly languages is beneficial. I've found that a broad understanding of computer engineering in general is often the most useful thing to know when approaching reverse engineering.
    – h0r53
    Commented Jul 22, 2022 at 19:44
  • 1
    Got it! Sorry, my misunderstanding, clearly.
    – 0xC0000022L
    Commented Jul 22, 2022 at 19:49

I think generally ppl who are interested in RE are those who want to learn how things work. If your research into specific problems results in hitting a wall due to lack of computer architecture knowledge, then definitely take a course.

However, you don't have to treat education like a checklist of prerequisites that you have to achieve before becoming proficient. You could also just learn specific topics organically as you go or as they're required.

Some knowledge is perishable but that isn't the case for computer architecture, learning it will help you for many years.


Generally speaking Reverse Engineering is the reverse of engineering, so instead of making a plan and building a product, you start with a product and try to reconstruct the plan that was used for it (or something as close to as you can get).

So it's kind of a puzzle and your prior knowledge can make it easier or harder for you. I mean you can technically analyze a computer, knowing nothing about computers just having a bunch of tools and then go for it. Idk you might first disassemble the housing, then you might identify components, simply the big stuff that wires go in and out from. Then you might label and identify wires and track which components are heavily interconnected or literally "central" to the system. Or which components are actively connected to a power cable and which receive their voltage passively. You might plug-in and out some of those components to find out which ones are crucial, which are auxiliary and which are optional. Then you might track which wires run a current or which voltage is applied to which components and how that changes over time and with interaction and so on.

That way you probably learn rather intimate but also rather slow how things work within a computer. Though obviously it helps tremendously if you don't start from 0. If you already know what you're dealing with and can identify components and their functionality then that frees you up to analyze the stuff that you don't know. It also helps you to not break stuff irrepairably and it can make the black box a whole lot more transparent. In the sense that if you're aware of the moving parts, a whole new set of inputs and outputs of the system and thereby a whole different angle of attack might reveal itself to you.

So whether it's particularly useful to your problem depends on the problem, but in general any prior knowledge about a system that you can acquire is probably suitable to make it easier for you.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.