1

I'm very much on the software side of things so I'm super inexperienced with debugging hardware. A custom processor I'm working with gives 2 debug pins, and given that it's an ARM system I suspect it to be 2-wire SWD. Looking at some tools I found online, specifically J-Link, it looks like I need to not only connect the two debug pins, but also a ground pin. However, I'm not given a third pin and I don't have a pinout of the processor due to it being a custom build. Is there a way to find a ground on the processor?

1
  • Software guy here too, I highly recommend using a multimeter to identify ground points (continuity test) and voltages in general. – multithr3at3d Jun 17 '20 at 1:23
2

Usually all the grounds on the PCB are connected together, so look for something like a metal shield, USB connector housing, or any other element that should be connected to ground (e.g. a capacitor). There may also be big copper areas used for the ground plane.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.