0

Is there anyone who can guide me how do i do snarfing of firmware on a chip of a VIN Tuner.

Is there anyone who can do it ?

Please respond if you can do it.

Ty

Vj

  • what exactly is "snarfing"? Some references might help. – Igor Skochinsky Apr 25 '18 at 7:17
  • Snarfing means eating fast with great appetite ... Totally, out of context here. Maybe @vrickson meant sniffing or extracting. – yaspr Apr 25 '18 at 10:09
  • 1
    @IgorSkochinsky I think he meant this sort of snarf: en.m.wikipedia.org/wiki/Snarfing – Elian Kamal May 24 '18 at 7:34
  • @ElianKamal thanks, I didn't know this term – Igor Skochinsky May 24 '18 at 7:46
3
  1. Get the information about the chip. It may happen that firmware, that you need is stored in the external flash memory chip, not in CPU.
  2. If it's still the CPU, that you want to dump, read the datasheet for the chip to learn how it's programmed and which hardware you need to connect to the chip (JTAG atapter most probably)
  3. Find if there are 'test points' on the PCB, which lead to the programming interface pins of the chip
  4. If there are no such 'test points' desolder the chip, and solder it to your own PCB where you have all necessary pins connected.
  5. Connect JTAG adapter to the appropriate pins
  6. Use the software which is designed to work with such chips via JTAG to read the firmware or SRAM.
  7. Most likely the chip will have the protection enabled, so that you won't be able to read the firmware, so you'll have to overcome that using various techniques.

Here's the example: http://blog.includesecurity.com/2015/11/NordicSemi-ARM-SoC-Firmware-dumping-technique.html

Not the answer you're looking for? Browse other questions tagged or ask your own question.