2 deleted 3 characters in body; added 10 characters in body
source | link

I am withhave some printed circuit boards of a device that is no longer manufactured. I need to repair these boards but there is no replacement for them. I can make other boards, buy the components, but I can not get the firmware, the microcontroller is a STC 89C58RD.

I found a datasheet:

http://www.stcmcu.com/datasheet/stc/STC-AD-PDF/STC89C58RD+-english.pdf

As I could see it can be programmed by serial RS232 interface. I looked for a programmer but I just find this document in chinese(I'm not sure) here as following :

https://www.stcmicro.com/pdf/STC-ISP-Programmer_V6.0_Manual.pdf

I already read and study a bit about JTAG standard and the TAP controller state machine to do a similar job with a Motorola Microcontroller, but I would like to know if someone know this microcontroller STC 89C58RD or has a tip about how to perform this task.

I am with some printed circuit boards of a device that is no longer manufactured. I need to repair these boards but there is no replacement for them. I can make other boards, buy the components, but I can not get the firmware, the microcontroller is a STC 89C58RD.

I found a datasheet:

http://www.stcmcu.com/datasheet/stc/STC-AD-PDF/STC89C58RD+-english.pdf

As I could see it can be programmed by serial RS232 interface. I looked for a programmer but I just find this document in chinese(I'm not sure) here:

https://www.stcmicro.com/pdf/STC-ISP-Programmer_V6.0_Manual.pdf

I already read and study a bit about JTAG standard and the TAP controller state machine to do a similar job with a Motorola Microcontroller, but I would like to know if someone know this microcontroller STC 89C58RD or has a tip about how to perform this task.

I have some printed circuit boards of a device that is no longer manufactured. I need to repair these boards but there is no replacement for them. I can make other boards, buy the components, but I can not get the firmware, the microcontroller is a STC 89C58RD.

I found a datasheet:

http://www.stcmcu.com/datasheet/stc/STC-AD-PDF/STC89C58RD+-english.pdf

As I could see it can be programmed by serial RS232 interface. I looked for a programmer but I just find this document in chinese(I'm not sure) as following :

https://www.stcmicro.com/pdf/STC-ISP-Programmer_V6.0_Manual.pdf

I already read and study a bit about JTAG standard and the TAP controller state machine to do a similar job with a Motorola Microcontroller, but I would like to know if someone know this microcontroller STC 89C58RD or has a tip about how to perform this task.

1
source | link

How to read firmware from an STC microcontroller?

I am with some printed circuit boards of a device that is no longer manufactured. I need to repair these boards but there is no replacement for them. I can make other boards, buy the components, but I can not get the firmware, the microcontroller is a STC 89C58RD.

I found a datasheet:

http://www.stcmcu.com/datasheet/stc/STC-AD-PDF/STC89C58RD+-english.pdf

As I could see it can be programmed by serial RS232 interface. I looked for a programmer but I just find this document in chinese(I'm not sure) here:

https://www.stcmicro.com/pdf/STC-ISP-Programmer_V6.0_Manual.pdf

I already read and study a bit about JTAG standard and the TAP controller state machine to do a similar job with a Motorola Microcontroller, but I would like to know if someone know this microcontroller STC 89C58RD or has a tip about how to perform this task.