When I tried readmem -s 4 -n 16384 0x1baef1a5 it always returns error: ERROR - Address(for any addresses from above table). So I assume these addresses is not an actual Flash Memory addresses. I tnink is this because processor’s memory controller maps the flash address space to the system address space. And flash word-size differs from system word-size. So, how to find the System memory address to read SPI Flash?

When I tried readmem -s 4 -n 16384 0x1baef1a5 it always returns error: ERROR - Address(for any addresses from above table). So I assume these addresses is not an actual Flash Memory addresses. I tnink is this because processor’s memory controller maps the flash address space to the system address space. And flash word-size differs from system word-size. How to find the System memory address to read SPI Flash?

How to determine the actual memory addresses of SPI Flash memory used in device running the eCos operating system? For example, show flash command returns the following info:

When I tried readmem -s 4 -n 16384 0x1baef1a5 it always returns error: ERROR - Address(for any addresses from above table). So I assume these addresses is not an actual Flash Memory addresses. I tnink is this because processor’s memory controller maps the flash address space to the system address space. And flash word-size differs from system word-size. Then how to find the System memory address to read flash?

How to determine the System memory addresses of SPI Flash used in device running eCos operating system? For example, show flash command returns the following info:

When I tried readmem -s 4 -n 16384 0x1baef1a5 it always returns error: ERROR - Address(for any addresses from above table). So I assume these addresses is not an actual Flash Memory addresses. I tnink is this because processor’s memory controller maps the flash address space to the system address space. And flash word-size differs from system word-size. So, how to find the System memory address to read SPI Flash?

When I tried readmem -s 4 -n 16384 0x1baef1a5 it always returns error: ERROR - Address. For any addresses from above table. So I assume these addresses is not an actual Flash Memory map addresses. I tnink is this because processor’s memory controller maps the flash address space to the system address space. And flash word-size differs from system word-size. Then how to convert SPI Flash address to the system address?

When I tried readmem -s 4 -n 16384 0x1baef1a5 it always returns error: ERROR - Address(for any addresses from above table). So I assume these addresses is not an actual Flash Memory addresses. I tnink is this because processor’s memory controller maps the flash address space to the system address space. And flash word-size differs from system word-size. Then how to find the System memory address to read flash?